Linux has been something like monotony nowadays. His reputation makes him the talk of the town – various Linux downloads, Linux programs, etc. . What’s nice about this is – it’s free! However, free software programs or is always limited by the increasing number of users and their needs constantly right. There will come a time when very few of them have a fair price for their effectiveness and usage. But that does not tremble and met with some of the existing Linux users, because they already know how good it is to use this system.
The majority of subscribers today have been using Linux operating systems and decided to move to Linux, due to some unpleasant experiences. You can almost hear their whispers when they talk of their legacy systems. A complaint filed by a woman in her workplace was heard to say that completely bored and annoyed with all of your current operating system and plans to migrate to Linux. No problem at all, because I think it is so easy to do. Another thing is the move to Linux can be very fast for no longer using the software.
Previously, switching to Linux to take a closer look at all the software and do some research on this new operating system. You should be aware of software that are compatible with this new operating system. Does your software run faster or easier to use and effective once the transfer to this new system? Consider the pros and cons before deciding finally.
A lot of Linux software usually comes for free. And yes, I’m really FREE! But is that free software does not care at all? A colleague once said that the more “free” software becomes, the more likely to get hit by some malware. So before going to use Linux, more attentive to these potential effects.
Another thing to consider is that Linux commands. Since it is new, there is the possibility that some of the commands are different from the old operating system. You should be familiar with it and then make sure you have some kind of a family with the previous operating system. In this way, it will be caught something similar to catch your breath, because it occurred after a sudden shock to switch something I do not know yet. So better to see everything in order to get all things – for sure.
However, if you think you’re ready to go to try something new, so we opted for something they have some positive feedback. Try to see the good side of your choice. Do not worry too much about some negative comments all the time know that you yourselves can handle any problems that may arise (which actually could never get rid of any unexpected failure). Consider the point that Linux has been very pleasing to its users and is very friendly to the budget as well. You should not worry because some of its programs are still offered for free (to download and use as well).
I think the best you can do is try to input valuable primarily for the Linux operating system. Find and read lots of comments. Visit the sites with favorable recommendations as some critics of this new operating system. As for software compatibility and make sure they made sure the list of major software you have – what they are and are not compatible with Linux. Better be ready before deciding to make a change.
To end this way, will weigh the odds and consider the possibilities before deciding to go for Linux. A dissatisfied customer operating system (other system) can opt for Linux to demonstrate their professionalism and efficiency. You can go through a lot of new commands to learn and know, but the important thing is that he is happy and comfortable with your choice. Well, the bottom line is this – if you are fed with what you have and you’re bored with his performance, then why stick when you have more options to choose? Roughly speaking, Linux may have been waiting all the time.
Archive for May, 2010
Linux – Eminent Choice Or Not?
Monday, May 31st, 2010linux/ unix simple commands
Sunday, May 23rd, 2010
www.zazzle.com www.youtube.com this is a tutorial on some simple unix and linux commands
Beginning the Linux Command Line
Wednesday, May 19th, 2010- ISBN13: 9781430218890
- Condition: NEW
- Notes: Brand New from Publisher. No Remainder Mark.
Product Description
This is Linux for those of us who don’t mind typing. All Linux users and administrators tend to like the flexibility and speed of Linux administration from the command line in byte–sized chunks, instead of fairly standard GUIs. Beginning the Linux Command Line follows a task–oriented approach and is distribution agnostic. Work with files and directories. Administer users and security. Understand how Linux is organized.
What… More >>
Newbie – Can people post archive? ,How many GB to download my blog? , How Do I Remove the advertisements from my RSS feed? Linux Newbie Administrator
Saturday, May 15th, 2010The authors, for some. com
Filed under:
1. Linux Documentation
2. > Newbie Administrator Guide
blog, blogger, blogspot, making money with blogs
Linux ads
RedHat Linux Command Network Traffic Monitor Windows VPS Hosting Linux Linux Linux Networking
3. 5 newsgroups
blog, blogger, blogspot, making money with blogs
Despite its drawbacks, newsgroups can be a very effective way of finding information.
Before going to the newsgroups, I recommend the Google news archives (http://groups. Google. Com, once known as DejaNews). This is a huge archive of newsgroup messages and you can search using search tools in Nice. In this way, you can often find the answer to your question without going through tons of garbage, and without exposing the anger after the publication of an issue “and was asked ten times this week.” You may be surprised by the amount of information through the Google archive.
blog, blogger, blogspot, making money with blogs
There are several newsgroups devoted to Linux and seems much better than other newsgroups (maybe they are better policed by the Linux experts?). Here’s a quick list:
news: comp. years. linux. announce (moderated – the recordings are made by a moderator, who examined before publication. Inspect the bottom of each message for more information on how to post.)
news: comp. years. linux. provision
news: comp. years. linux. hardware
news: comp. years. linux. security
news: comp. years. linux. misc (Miscellaneous)
news: comp. years. linux. The defense (Use this for a debate on the pros and cons of Linux and perhaps a comparison of Linux with other operating systems. This is an excellent newsgroup if you want to enter into endless discussions.)
News: alt. linux. sux (you can read and write really all opinions on Linux).
news: comp. years. linux. Networks
news: comp. years. linux. X (X-Windows)
news: comp. years. Unix (general UNIX newsgroup)
Note that there is a newsgroup etiquette (“netiquette”), and runs the risk of rejection and may be exposed to fire if you decide to break it. The main points:
*
Do not post on a topic unrelated to the topic of the newsgroup;
*
Do not post to many newsgroups at the same time (cross-post);
*
Use plain ASCII, do not send attachments, images, HTML, etc;
*
Do not advertise (particularly commercial products);
*
Do not write only CAPS – GETS YOU KILL presented.
*
Use a simple descriptive subject (“HELP” will not work) and briefly explain the problem. Includes distribution and version number, and identify the hardware (USR 56K modem is wrong – list the model number).
To read newsgroups (also called Usenet), you must configure access to a news server. The simplest may be to use Mozilla (“Change” – “Preferences” – “Mail & Newsgroups”) and specifying the news server (your Internet Service Provider, ISP, should have given the server name) and then add the appropriate newsgroup to your list of local “mailboxes.” If you do not know the name of news server, try: “news. My_isp_provider_name. And_domain” or perhaps “only my_isp_provider_name. And_domain.
To read the news, I prefer KNode and (type X in the terminal). Installing and learning newsgroups was certainly worth my effort.
* License
Inaccessible Linux Partitions After Using mksf.ext3
Saturday, May 15th, 2010mksf. ext3 is a Linux command that allows you to create a Linux filesystem (ext3), usually in a hard disk partition. When you run, you must specify the device name of the file system must reside. The command creates the ext3 file system with the newspaper. If you run this command on a system connected to multiple hard disks (eg RAID) is recommended to specify the name of the device with care. Failure to do so could result in cases of data loss, such as inaccessible partitions. However, to deal with these situations, you generally must restore the lost data backup or use Linux data recovery application that could actually scan your hard drive and restore lost data in a safe place. For example, you use a RAID 1 system with multiple disks (eg / dev/sdb1 and / dev/sdc1). Then use mdadm to create a RAID device (eg / dev/md0) and apply mkfs. ext3 command individual units. After that, you try to install the system, the partitions seem to be inaccessible and can not access the data, too. MDAM is a utility which can manage, create, test and remove the MD devices (software RAID Linux) CauseA system exhibits similar behavior as before Linux if running mkfs. ext3 superblock command overwrites the information. This leads to inaccessible partitions. So if you need to use this command, you must run the RAID device (/ dev/md0 in this case) itself and not in other units. RESOLUTION To resolve these problems, you should follow the following methods: Try running the following command: e2fsck-f / dev/md0 If the problem persists, restore from backup backupIf and delete invalid data is available, you must scan disk hard and recover lost data recovery using Linux tools. The data recovery Linux applications are powerful tools for data recovery algorithms using efficient tracking to recover lost data. These utilities are responsible for examining a crashed disk drives logically and restore security. These instruments provide an interactive user interface and security features that help to achieve results in full recovery. Stellar Phoenix Linux Data Recovery is an advanced data recovery designed for ext2, ext3 and ReiserFS file system drive. This is a Linux recovery tool which provides recovery of security, full documentation and functionality. The application is compatible with most Linux distributions including Red Hat, Slackware, Turbo Linux, Unbuntu and more.
simple linux commands part 1
Tuesday, May 11th, 2010
This is a video about simple linux commands that work on nearly every distribution of linux. This video is for people brand new to Linux Providing training videos since last Tuesday. technoblogical.com Thanks for watching.
Explaining file system
Monday, May 3rd, 2010
Image taken on 2008-12-13 13:59:54 by linux_fan.
